麦肯单片机MDT10P611,两路PWM,

1. General Description
This EPROM-Based 8-bit micro-controller uses a fully
static CMOS technology process to achieve higher
speed and smaller size with the low power
consump-tion and high noise immunity. On chip memory
includes 1K words of ROM, and 64 bytes of static RAM.
2. Features
The followings are some of the features on the
hardware and software :
?
Fully CMOS static design
?
8-bit data bus
?
On chip ROM size : 1K words
?
Internal RAM size : 64 bytes
?
37 single word instructions
?
14-bit instructions
?
8-level stacks
?
Operating voltage : 2.5 V ~ 5.5 V
?
Built in 8MHz, 4MHz internal RC
?
Oscillator can be selected by programming
option:
INTRC－Internal 8MHz/4MHz
?
Addressing modes include direct, indirect and
relative
addressing modes
?
Power-on Reset
?
Power edge-detector Reset
?
Sleep Mode for power saving
?
8-bit real time clock/counter(RTCC) with 8-bit
programmable prescaler
?
Soft-ware I/O pull-up/down or open-drain control
?
On-chip RC oscillator based Watchdog
Timer(WDT)
?
Timer 1: 8-bit PWM/counter with 8 bit period
?
five interrupt source：
-External INT Pin (PB0)
-Timer0
-PB5~1 Interrupt on pin change
-PA5~0 Interrupt on pin change
-TMR1 and PR1 Compare
PINS I/O
OSC
MDT10P611P12
14
12
MDT10P611S12
14
12
IRC
8MHz/4MHz
3. Applications
The application areas of this 10P611 range from
appliance motor control and high speed automotive to
low power remote transmitters/receivers, small
instruments, toy, automobile.